Fibaro Dimmer 2

fibaro dimmer2

Description

Specification:
Power supply:220-240V ~ 50Hz
Power consumption< 1.3W Operational temperature:0-35°C Dimensions (L x W x H):42.5 x 38.25 x 20.3 mm For installation in boxes:Ø ≥ 50mm Rated load current:0.25-1.1A Device temperature protection:105°C Overcurrent protection:required external 10A circuit breaker Active element:semiconductor electronic switch ε Device control:remotely – radio waves directly – external switch Radio protocol:Z-Wave Radio signal power:up to 1mW Radio Frequency: ​ 921.4, 919.8 MHz ANZ; Range:up to 50 m outdoors up to 30 m indoors (depending on building materials) Comply with EU directives:RoHS 2011/65/EU LVD 2006/95/EC EMC 2004/108/EC R&TTE 1999/5/EC

Extra Features

• Compatible with any Z-Wave or Z-Wave+ Controller
• Controlled by FIBARO Home Center or any other Z-Wave/Z-Wave+ controller
• Active element: semiconductor electronic switch
• Maximum output of 250W
• FGD-212 is an extension unit
• Advanced microprocessor control
• Implemented algorithm of smart light source detection
• Auto-adjustment of the appropriate control mode to connected load
• Supports both leading and trailing edge
• Active power and energy metering functionality
• Soft start function
• Z-Wave range tester
• Memory of the last lighting level settings
• Configuration menu with LED
• Works with various types of switches – momentary, toggle, three-way, etc.
• Compatible with 2 and 3 wire electrical systems
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations

Use cases:
As a dimmer it operates under the following loads:
• 230V operated conventional incandescent and halogen light sources
• ELV electronic transformers (12V operated halogen lamps and dimmable LED bulbs)
• MLV ferromagnetic transformers with 12V operated halogen lamps
• dimmable LED bulbs
• dimmable compact fluorescent CFL tube lamps
• supported dimmable light sources with minimal power of 5VA (power factor > 0.5) using FIBARO Bypass FGB-002

Without dimming function it may work with:
• compact fluorescent lamps
• fluorescent tube lamps with electronic ballast
• LED bulbs (power factor > 0.7)
• supported light sources with minimal power of 5VA (power factor > 0.5) using FIBARO Bypass FGB-002

Supported loads:
• resistive load: 50-250W
• resistive-inductive load: 50-225VA
• resistive-capacitive load: 50-200VA